Moldflow Design Link V5.0 英文光碟正式版 (在MPA軟體和優秀的CAD系統之間提供了幾何資料介面)





破解說明:安裝前請先閱讀LEGEND資料夾內install.txt文件檔，即可完成安裝。



軟體簡介:

MoldflowDesignLinkV5.0英文光碟正式版(在MPA軟體和優秀的CAD系統之間提供了幾何資料介面)


內容說明:

MoldflowDesignLink(MDL)能夠用於直接地輸入CAD幾何學模型於MoldflowPlastics
Advisers及PlasticsInsight中。通過使用標準的幾何格式，包括IGES,STEP和
Parasolid，還有允許直接輸入MPA的Pro/ENGINEER和CATIAV5模型檔，在MPA軟體
和優秀的CAD系統之間提供了幾何資料介面。


MoldflowDesignLink

MoldflowDesignLinkT(MDLT)providesfasterandeasieraccesstoCADdataby
allowinguserstoimportleadingsolidgeometryformatsdirectlyinto
MoldflowPlasticsAdvisers(MPA),MoldflowPlasticsInsight(MPI),and
MoldflowMagicsSTLExpertTsoftware.

ThisgivesuserstheflexibilitytoacceptCADdatafromalmostanysource,
anditalsoprovidestheaddedbenefitofusingnativeCADdatafromall
Parasolid-basedCADsystems,Pro/ENGINEER,CATIAV5andSolidWorks.

MDLiscommerciallyavailableinthreeversions:
*MDL/Parasolid-fortheimportofParasolid,SolidWorks,IGES,andSTEP
models
*MDL/Pro/ENGINEER-fortheimportofPro/ENGINEERpart,IGES,andSTEP
models
*MDL/CATIAV5-fortheimportofCATIAV5partmodels

Capabilities

WhenMDLisusedwithMoldflowMagicsSTLExpertsoftware,theCADsolid
modelisconvertedtoaSTLmodelformatwhichcanthenbefixedand
optimizedforuseinaMPAorMPIanalysis

WhenMDLisusedwithMPAsoftware,theCADsolidmodelisautomatically
convertedtotheMPAmodelformat

WhenMDLisusedwithMPIsoftware,theCADsolidmodelcanbe
automaticallyconvertedtotheMPImeshformat,orthesurfacescanbe
importedandsubsequentlymeshedusingMPI/Synergy'sadvancedmeshing
capabilities
*ImportedgeometryisrepresentedinMPI/SynergyastrimmedNURBSsurfaces
*Thesesurfacescanbeindependentlyviewed,grouped,ormeshed
*NURBSsurfacesaresupportedbytheIGES,STEP,Parasolid,Pro/ENGINEER,
CATIAV5,andSolidWorksfileformats

SupportedModelFormats
Parasolidfilesupport-nativeParasolidmodelscreatedinany
Parasolid-compatibleCADsystem,includingUnigraphics,SolidEdge,IronCAD,
andTopCadandsavedinParasolidversionsuptoandincludingversion16.0

Pro/ENGINEERfilesupport-nativePro/ENGINEERpartfilescreatedin
versionsuptoandincludingWildfire2.0

CATIAV5filesupport-nativeCATIAV5partfilescreatedinversionsupto
andincludingV5R13(Release13)

SolidWorksfilesupport-nativeSolidWorkspartmodelscreatedinversions
2004and2005

STEPfilesupport-STEPAP203andSTEPAP214ClassII,ClassIII,ClassIV,
ClassVentitiesandClassVIentitiesandassemblies

IGESfilesupport-closedvolumeIGESfileswithanextendedlistof
supportedentities